- Start
- Env. simulations
- Climate
Climate
Icing
Temperature
Environmental simulations
Equipment
Altitude Icing
Climatic chambers
Temperature chambers
Test procedure
Climate tests and temperature storage are the easiest way to provide a defined temperature (temperature storage) or for higher demands a defined temperature with a certain amount of humidity (relative or absolute humidity - climate test).
Altitude Icing
Temperature range: | -20°C bis +60°C |
Pressure: | 15mbar abs.(0.218 PSI) up to 3 bar rel.(43,5 PSI) |
Test chamber size: | max. 595mm x 480mm x 580mm (WxHxD) |
Climatic chambers
Temperature range: | -72°C up to +180°C |
Humidity range: | 5% to 95% adjustable |
Test chamber size: | max. 1100mm x 1100mm x 1100mm (WxHxD) |
Temperature gradient: | 20 K/min |
Temperature chambers
Temperature range: | -72°C up to +180°C |
Test chamber size: | max. 1500mm x 2800mm x 2800mm (WxHxD) |

Standards
Cold
Heat
Cold
-
DIN EN 60060-2-1 Test A High-voltage test techniques - Part 2: Measuring systems
-
DIN SPEC 79009 planned standard for E-Bikes and Pedelecs
-
BS 2011 Part2 Test A Methods for Environmental Testing of Electronic Components and Equipment
- VG 95332 page 3 / - page 22
-
MIL-STD 810 Meth. 502.2 Environmental Engineering Considerations and Laboratory Tests
- MIL-E-5272 test 4.4
Heat
-
DIN EN 60068-2-2 Test B Environmental testing - Part 2-2: Tests - Test B: Dry heat
-
BS 2011 Part 2 Test B Methods for Environmental Testing of Electronic Components and Equipment
- VG 95332 page 4 / - page 23
- VG 95210 Meth. 108
-
MIL-STD 810 Meth. 502.1 Environmental Engineering Considerations and Laboratory Tests
-
MIL-STD 883 Meth. 108 Test Method Standard Microcircuits
-
MIL-E-5272 test 4.1 Environmental Testing, Aeronautical and Associated Equipment, General Specification For
-
MIL-STD 202 Meth. 108 A Test Method Standard, Electronic and Electrical Component Parts
- automotive standards (BMW, VW, usw.)