Schwallwasser

Splash Water Test

Splash water tests and jet water tests are primarily used to determine the tightness of enclosures, capsules or similar units.

Fluids of various compositions can serve as the splash medium, such as demineralized water, drinking water, salt water, antifreeze or suspensions of fine dust and water. Especially parts from the automotive industry are tested with an air-water temperature shock. This procedure simulates, for example, driving through a puddle in winter, when the part under test has a high temperature due to the surrounding engine and then undergoes immediate cooling by the water. The water is tempered to a temperature of 0 to +4°C, while the part under test has been brought to a high temperature (e.g. +160°C).
Here, effects of alternating expansion are tested on materials, whereby the penetration of water is just as much a part of the test as the function of the device.

Request offer
splash
Splash Water Test  Standards

  • BMW GS 95024-3-1
  • ISO 16750-4
  • MBN LV124-2
  • VW 80101
  • VW 80000
We also offer the following tests, among others:
splash water
according to the following standards, among others:

  • ASTM
  • BMW GS 95024-3-1
  • ISO 16750-4
  • MBN LV124-2
  • VW 80101
  • VW 80000

click for more infos
Splash Water Tests
chemical
according to the following standards, among others:

  • RTCA DO-160G
  • DIN ISO 16750-5
  • MIL-STD-810G
  • VW 50180
  • Airbus ABD0100.1.6
  • BMW GS 95003-5

click for more infos
Chemical Resistance
sand
according to the following standards, among others:

  • DIN EN DIN EN 60068-2-68
  • MIL-STD-810G
  • RTCA DO-160/li>
  • DIN SPEC 79009
  • MIL-STD-202D
  • DEF STAN 00-35

click for more infos
Blowing Sand / Dust