Environmental simulation
Test procedure

Temperature change tests are used to determine the effect which frequent temperature changes may later have in the field. Important values are the test temperature difference, the dwell time in every temperature zone and the temperature changing time which depends on the type and properties of the object.
Icing an object completely can be done by feeding a controlled amount of humidity into the test chamber.

Request offer


Chamber volume: up to 10.000 liter
Temperature range: -70°C up to +200°C
complex test cycles
pipe connections, through-flow of DUT (device under test) with various media

  • DIN EN 60068-2-33 Environmental testing - Part 2: Tests; guidance on change of temperature tests
  • DIN IEC 60068 parts 2-30 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
  • DIN IEC 60068 parts 2-38 Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test
  • DIN EN 60068-3-1 Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests
  • DIN SPEC 79009 planned standard for E-Bikes and Pedelecs
  • MIL STD 202 Meth. 106 D Electronic and Electrical Component Parts
  • MIL STD 883 Meth. 1004 Test Method Standard - Microcircuits
  • MIL STD 750 Meth. 1021 Test Method Standards for Semiconductor
  • MIL STD 331 Meth. 105 Fuze and Fuze Components Environmental and Performance Tests For
  • MIL STD 810 Meth. 105 Environmental Engineering Considerations and Laboratory Tests
  • MIL E 5272 Test 4.4 Environmental Testing Aeronautical And Associated Equipment Specification
  • MIL-T 5422 E part 4.4 Testing Environmental Airborne Electronic and Associated Equipment
  • automotive standards (BMW, VW, etc.)
ContactReferencesDisclaimerPrivacyyoutube logo